Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calling for a part of the day

Status
Not open for further replies.

suzytek

MIS
Feb 3, 2006
67
EG
The incoming call ring at number (3100) for 24 hours
How can I make it ring only from 8:00 to 16:00 and then ring at number (3200)
(Step by step)
 
Use a time of day service in Voice mail system (if any)
 
There is a redirection of call by time of day that you can set up. The parameters and times are set up in the Customer Data Block and then there are a some additional class of service features that need to be turned on to the sets effected.
 
Time of day redirection might not be the solution suzytech is waiting for because the set 3100 will ring before no answer or not busy
 
are you wanting call forward and hunt only after hours? internal and external...

john poole
bellsouth business
columbia,sc
 
As eluded to, "tell them to call forward the phone"?

Also eleided to [front end the called number with a "time of day controller" that during the day directs callers to an announcement that simple says "Please stay on the line while yor call is conected"]

This way you can take holidays into the mix as well











~
 
you can set up hunt groups and ffc's that allow a user to remove or place his dn in a hunt group with a code.. fna does not offer that control... i forward my phone to dn 7711, fdn with the rco set to 3 rings.. 7711 has his set hard forwarded to me... during the day my calls do not forward to him, after hours if he needs a call he removes his hard forward, he then gets his calls plus my calls after 3 rings...

i would tell my manager that he doesn;t get extra points for stupid request...

john poole
bellsouth business
columbia,sc
 
dear john poole
can you write the steps to do that because i have not the documents for my 1C centeral.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top