I have a group of 3300's and 200's tied together using iptrunking to 4 digit dial between each other and am using the Main MXE 3300 with 4 PRI's to do the external calls. My problem is tha the 200's only recieve the number when a call comes in from the 3300s. The customer wants name and number. I am just working on internal calls right now. I have played with COS of the 3300 and no luck. I have played with COS otions in 200 (502,508,613) with no luck either. Anybody have a clue what I am missing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Caller ID from a 3300 to 200?
- Thread starter bambamz3
- Start date
- Thread starter
- #3
Do you mean the 3300's are IP trunked and the connections to the sx200 are something else. What are you using on the sx200 for that connection an NSU?
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
- Thread starter
- #5
Try setting the COS of the IP trunks on the 3300 to the same one that the PRI trunks use and test.
Does name and number come across for and internal call 3300 set to sx200 set
**********************************************
What's most important is that you realise ... There is no spoon.
Does name and number come across for and internal call 3300 set to sx200 set
**********************************************
What's most important is that you realise ... There is no spoon.
- Status
Similar threads
