Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

caller id @ BC11

Status
Not open for further replies.

TechNasser

Technical User
Jun 1, 2009
6
GR
hi all
i have a md110 VERSION=CXP1010001/5/BC11SP14/R4C
I bought the license to activate the caller id
on the analog extensions, i could not initiate an
extension with caller id , this message appears:

<EXTEI:DIR=450,EQU=001-1-60-01 ,TYPE=EL6,CAT=1,ICAT=8000;
NOT ACCEPTED
ICAT
NOT IN RANGE

this the old license and the new one
the old
ANALOGUE-EXTENSION FAL104451 128
the new
ANALOGUE-EXTENSION FAL104451 128
ANALOGUE-EXTENSION-CLIP FAL1046191 128
what to i have to do to activate the callerid on my md110
and what are the ELU29 boards that support the callerid?

thanks
 
I remember R10J supports caller ID.
 
How did you manage to buy Caller Id for an old BC11 system?
BC11 was closed for add-on sales 3 yars ago.

The license FAL 104 6191 was introduced in MX-ONE TSW and does not work in BC11.

This looks like a clear case of fraud, that someone is illegaly selling RTU licenses.
Where did you buy this license? What EIC-number do you have?
(LIDAP;)
 
^^

+1

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Regarding the sales of licenses for equipment older than BC12, we were able to buy add-on licenses for BC10 this year, when we asked our vendor they told us at first that it was not possible, but then they checked at E-shop and said they were able to buy them.
 
Caller ID with BC11 over analogue extensions is working with certain patch, so it works, but AASTRA (X-Ericsson) should provide you with SACOS and patch file for this.
Regards
 
i bought the license from the local vendor
i have already used the ELU29 R10J board
but it does not work. the local vendor said that
it needs a batch file for the bc11???
 
To be able to assist you getting this functionality to work, I need the EIC/IPA-number. LIDAP;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top