Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call waiting tone

Status
Not open for further replies.

EndreMD

Technical User
Sep 22, 2019
38
RO
Hi dear members !
My question is maybe a little bit confusing:
When an extension is busy and a second extension is calling it, how to set up a call waiting tone? I mean that the second calling party not to hear busy tone but to hear a waiting tone until the first conversation is released and the second conversation can be establish.
Thank you !
 
For hear callwaiting when B party is busy press 5
And for call back press 6 after hear busy from B party

PG4E
 
Thank you inIsp05 for helping. I'll try this when I get to workplace.
 
Thank you for reply, the 6 for call back it's ok, the 5 doesn't do anything...
 

SERV = D1D2 D3D4D5D6D7D8D9D10D11D12D13D14
D6 = Automatic Call Back Characteristics
0 Not permitted to initiate automatic call back.
1 Permitted to initiate automatic call back towards another extension in the
same exchange or private network.
2 Permitted to initiate automatic call back towards another extension in the
same exchange, in private network or towards external line.
D7D8 = Call Waiting Tone Characteristics
00 Not permitted to initiate or receive call waiting tone.
01 Permitted to initiate transmission of call waiting tone.
02 Reception of call waiting tone from another extension permitted ***).
04 Reception of call waiting tone from another extension and PBX operator
permitted ***).
06 Reception of call waiting tone from another extension, PBX operator and
external line permitted ***).
 
Thank you inIsp05 and pviorel for your reply, I'll try this solutions these days.
Nice day !
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top