We have Argent Office 2.2 system with analog phones. We want to disable call waiting ( we need busy signal), when another call comes in. "Call waiting on" checkbox on User Telephony tab only enables/disables beep tone the calling party hears when it is on another call.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call waiting disabling 1
- Thread starter auskar85
- Start date
No
call waiting enable in user telephony enables or disables the call waiting feature for that user.
Are calls ringing direct to users or to a group?
if they are ringing to a group then you need to switch of queuing*
*personally I find it is seldom a good idea to do this & return busy on a group number but if the customer insists...
A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
call waiting enable in user telephony enables or disables the call waiting feature for that user.
Are calls ringing direct to users or to a group?
if they are ringing to a group then you need to switch of queuing*
*personally I find it is seldom a good idea to do this & return busy on a group number but if the customer insists...
A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
-
1
- #6
this request is for Argent office Not IP office
Call appearance keys did not exist on that platform guys
+ the OP stated he is on analog phones.
A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
Call appearance keys did not exist on that platform guys
+ the OP stated he is on analog phones.
A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
- Status
