Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Server adrdesses manual settings

Status
Not open for further replies.

Latya

Programmer
Mar 6, 2003
56
HU
Hi! We have CM 6.x. We like to change DHCP server to manual settings on the IP extensions ( All IP ext s 9650 C) . In DHCP server in the Option 242 -in tis moment- there is 3 IP ADDR for Call server: 1 for main server, 1 for ESS, and 1 for LSP. If I set the phone by manual, there is only 1 IP ADDR for call server. How can I set the other 2 call server addr?

 
you can only manually set one IP address. When the phone register, it should get it's MGC from the Communication manager (depending upon how you have it set up, you can set this in the ip-network-region (page 2)

>mike


ACE - IP Telephony
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top