Can anyone tell me how to program a menu option to dial out to another number?
For example, when the caller selects option 3, I want it to dial out to an 1-800 number to connect callers to an off site call center.
Any help would be greatly appreciated.
just drag a call transfer onto the screen, name it, right click properties and enter the number..if it;s a dial 9 plus and does not work look at your rpl's
It doesn't give me the option, it only allows me to foward to the operator or to a specific DN.
Do I have to foward an extension and then point it there? It seems that was how it was done brfore.
How do I create a virtual DN and foward it to an external number (if that is the solution).
Create a Phantom Port (500) set in LD 20. DTR DCFW 9npanxx to call the external number. You can test it by dialing the Phantom DN. Then point the app builder to transfer to the Phantom DN you created.
fastest way.. ld 23 new acd xxxx maxp 1 ncfw to the external number..
dial the new number (xxxx) you'll get the outside line... but you may still be blocked from external to external... there is a dozen ways to block that..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.