Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Pilot\Cisco Integration

Status
Not open for further replies.

JcBWF

Technical User
Jan 9, 2007
228
US
Trying to integrate Call Pilot\Cisco CUCM 5.1. I have the PRi's working great as QSIG, but can't get the MWI on the Cisco phones. Below is one of the Dch that I think is right from the other posts. Any help is appreciated.

ADAN DCH 15
CTYP MSDL
GRP 3
DNUM 1
PORT 0
DES TIE_TO_CISCO
USR PRI
DCHL 104
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID 26
RCAP COLP NDI CCBI CCNI PRI DV3I CTI QMWI
PR_TRIGS DIV 2 3
CNG 2 3
PR_RTN NO
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7

Perfection is expected, Excellence is Tolerated
 
I have another issue here but my message waiting is working well from Call Pilot so here is my DCH config. I have 12 sites with no less than 4 DCH configuured this way woth no problem.

ADAN DCH 72
CTYP MSDL
GRP 0
DNUM 12
PORT 2
DES QSIG_MGCP_CISCO0
USR PRI
DCHL 72
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE NET
CNEG 1
RLS ID **
RCAP COLP NDI CCBI CCNI PRI DV3I CTI QMWI
PR_TRIGS DIV 2 3
CNG 2 3
CTR2 2 3
PR_RTN NO
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
I got this configuration form Cisco.com.
 
To add to my last message, I beleve if you remove your RLS to nothing you should get your pass through.
 
What's the intergration between the CP and CM? I know that Unity to Nortel takes a PIMG.
 
Bigdaddy - We're using QSIG PRIs

Perfection is expected, Excellence is Tolerated
 
your rcap is right.. after you remove rls x, dis msdl x all, enl msdl x fdl.. write that data tot he msdl.. is the cisco phone a steering code? if you dial xx plus the cisco dn, you may never get lights..

john poole
bellsouth business
columbia,sc
 
Johnpoole - Good to hear that the rcap is right. I will be removing changing rls next week (they actually let me take time off). We are using CDP for the calls going to Cisco.


Perfection is expected, Excellence is Tolerated
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top