Trying to integrate Call Pilot\Cisco CUCM 5.1. I have the PRi's working great as QSIG, but can't get the MWI on the Cisco phones. Below is one of the Dch that I think is right from the other posts. Any help is appreciated.
ADAN DCH 15
CTYP MSDL
GRP 3
DNUM 1
PORT 0
DES TIE_TO_CISCO
USR PRI
DCHL 104
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID 26
RCAP COLP NDI CCBI CCNI PRI DV3I CTI QMWI
PR_TRIGS DIV 2 3
CNG 2 3
PR_RTN NO
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
Perfection is expected, Excellence is Tolerated
ADAN DCH 15
CTYP MSDL
GRP 3
DNUM 1
PORT 0
DES TIE_TO_CISCO
USR PRI
DCHL 104
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID 26
RCAP COLP NDI CCBI CCNI PRI DV3I CTI QMWI
PR_TRIGS DIV 2 3
CNG 2 3
PR_RTN NO
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
Perfection is expected, Excellence is Tolerated