Call Fwd Off Prem

[tclubb]

looking to CFD Off prem from a MICS 7.0, using PRI and a group of analog trunks. shows invalid # when trying F4

 

[curlycord]

Have you done any of the programming?

-The set must be allowed "Allow Redirect"
-Use the Destination code then the number

Please in future if you don't mind close your threads with either a resolution, if it worked or didn't or a thank you instead of leaving those who helped hanging.
Thanks






________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[tclubb]

will the existing destination code work or will i need to program a new one just for this

 

[curlycord]

Yes existing will work or build another, you can have as many Dest codes as you want that use the same Route.

If this is a set/s that always forward to the same number then you can build a new Route and enter that external phone number in that route, then build another dest code such as 71 to use that route.
To Forward:
F471
The phone is now forwarded to that external number.

Note: For the analog lines make sure Supervision is turned on.




________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[tclubb]

Thanks will arrange to go out

 

[tclubb]

allowed redirect and build new dest code worked just fine thanks

 

[curlycord]

Cool, thanks for updating!

________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN