Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Fwd Off Prem

Status
Not open for further replies.

tclubb

Vendor
Apr 20, 2005
29
US
looking to CFD Off prem from a MICS 7.0, using PRI and a group of analog trunks. shows invalid # when trying F4
 
Have you done any of the programming?

-The set must be allowed "Allow Redirect"
-Use the Destination code then the number

Please in future if you don't mind close your threads with either a resolution, if it worked or didn't or a thank you instead of leaving those who helped hanging.
Thanks






________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
will the existing destination code work or will i need to program a new one just for this
 
Yes existing will work or build another, you can have as many Dest codes as you want that use the same Route.

If this is a set/s that always forward to the same number then you can build a new Route and enter that external phone number in that route, then build another dest code such as 71 to use that route.
To Forward:
F471
The phone is now forwarded to that external number.

Note: For the analog lines make sure Supervision is turned on.




________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
allowed redirect and build new dest code worked just fine thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top