CALL FORWARDING TO CELL PHONE

[tighttuk]

I HAVE A MAGIX 2.2 WITH A T-1 SET UP FOR DID AND OUTBOUND CALLING, I WOULD LIKE TO HAVE THIS EXT.[313] CALL A CELL PHONE AFTER 4 RINGS IF NO ANSWER .I SET UP TRUNK TO TRUNK TRANSFER TO ALLOW, AND ALSO SET UP A FORWARD BUTTON BUT WHEN I PRESS THE FORWARD BUTTON IT SAYS FORWARD TO AND I TRY TO ENTER THE NUMBER IT WILL NOT TAKE THE NUMBER AS SOON AS I ENTER THE FIRST DIGIT WHICH IS A 9 THE PHONE GOES TO THE MAIN DISPLAY HELP

 

[ttech]

You have to allow Remote forward under extentions in sys programming.

 

[cfwdude]

I am trying to do the same, forward to a cell number. My extension is in the allowed list under Remote Call Forward, but when i go to enter the phone number to forward to, after two digits, it is forwarding to that extension.
phone number 555-1212, i get forward to ex.55.

 

[TouchToneTommy]

cfwdude, sounds like you're not including the "9" at the beginning of the outside number that you want to foreard to. Remember to enter "9"-destination number-"#".

 

[luisoa]

under the extension field in programming the is an option for remote forward, you have to put that extension in that field

 

[merlinman]

AND - do not forget TRUNK TO TRUNK Transfer permission as well.