Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Forwarding SOPHO IS3030

Status
Not open for further replies.

broggi811

IS-IT--Management
Jun 21, 2006
9
Good morning.

I write from Italy.

I try to create a call forwarding with CHFALC to transfer to a cellular number a call when not responding but I have this error.

<chcalf:0,512,03392448652
Invalid input data
REJECTED

If I try with an internal DNS is OK.

Somebody help me.. Thank you very much.. Ricky
 
Can you set it on other dnr's ?
Do you have TAC 0 in the alternative destination tree ( 5 ? )
Does 512 have the right traffic class ?
 
Thank you very much !!!

Can you explain me what I should "set on the other dnr" ?

What do you mean by "TAC 0"

Yes, 512 has the right traffic class..

I'm not very experienced on this stuff, please Help Me.

Take care..

 
Now I got your first question, no I can't set it on any other DNR. It doesn't work



 
try dinasd:5,0; or dinars:5,21;
see if the trunk acces code (tac) 0 is filled in
if not assign it with asintn command.
 
try putting the out going prefix for your company in front of the out going number ie chcalf:0,512,903392448652
 
Most likely you have a 0 as trunk access code and 033 for area code, therefore the command should be:

chcalf:0,512,003392448652

As CoolDude6 asks, do you have a TAC (Trunk Access Code) in your alternative destination tree??

didial:;

Look at treenumber (most likely 4 or 5) for alternative destination dialing and write this command:

dinars:<TREE>,21;

Then you should see your TACs for alternative destinations (call forwardings).

If this still doesn't work, check your external dialing tree.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top