senoralastair
IS-IT--Management
hey folks,
I've spent a few hours searching through tek tips, but i still can't work out my little problem. Firstly I have to say that i'm not a phone guru like some of you guys, and i've kind of fallen into the phone programming. I must admit that i do rather like it though (when it works)... = )
My problem at the moment is that there are a few phones here that aren't going to voicemail when the phone is busy, it's just saying something like "destination busy, activate ring again?".
I've gone through the CLS codes and from what I can work out there doesnt seem to be anything obviously wrong with it (to my n00b eyes anyway...)
could someone pls have a quick squiz at the TN setup and see if you can spot what i'm doing wrong?
(ps, DN 199 is voicemail... )
thanks heaps in advance!
--------------
REQ PRT
TYPE: tn
TYPE TNB
TN 18 7
DATE
PAGE
DES
DES 2008
TN 018 0 00 07
TYPE 2008
CDEN 8D
CUST 0
FDN 199
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 99
SCI 0
SSU 0010
LNRS 16
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS TLD FBD WTA LPR PUA MTD FNA HTA ADD HFD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTA SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD CNTD CLTD ASCD
CPFA CPTA ABDD CFHA FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHA DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD
CPND_LANG ENG
RCO 0
EFD 199
HUNT 199
EHT 199
LHK 0
PLEV 02
SPID NONE
AST 00
IAPG 0
AACS YES
ACQ AS: TN
ASID 16
SFNB 2 5 6 9 10 11 12 13 15 16 17 18 19
SFRB 1 2 15
USFB 1 3 4 5 6 7 9 10 12 13 14 15
CALB 1 3 4 5 6 8 9 10 11 12
FCTB
ITNA NO
DGRP
PRI 01
MLWU_LANG 0
DNDR 0
KEY 00 ACD 399 0 8239
AGN
01 MSB
02 NRD
03 SCR 436 0 MARP
04 TRN
05 ACNT
06 AO6
07
DATE 5 SEP 2007
NACT POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
VAS008 ADMIN VSID 9 CUST -- TIME & DATE 15:57:34 5/09/2007
TIM000 15:57 5/9/2007 CPU 0
AUD370 VSID 9 CUST --
TIM000 16:00 5/9/2007 CPU 0
I've spent a few hours searching through tek tips, but i still can't work out my little problem. Firstly I have to say that i'm not a phone guru like some of you guys, and i've kind of fallen into the phone programming. I must admit that i do rather like it though (when it works)... = )
My problem at the moment is that there are a few phones here that aren't going to voicemail when the phone is busy, it's just saying something like "destination busy, activate ring again?".
I've gone through the CLS codes and from what I can work out there doesnt seem to be anything obviously wrong with it (to my n00b eyes anyway...)
could someone pls have a quick squiz at the TN setup and see if you can spot what i'm doing wrong?
(ps, DN 199 is voicemail... )
thanks heaps in advance!
--------------
REQ PRT
TYPE: tn
TYPE TNB
TN 18 7
DATE
PAGE
DES
DES 2008
TN 018 0 00 07
TYPE 2008
CDEN 8D
CUST 0
FDN 199
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 99
SCI 0
SSU 0010
LNRS 16
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS TLD FBD WTA LPR PUA MTD FNA HTA ADD HFD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTA SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD CNTD CLTD ASCD
CPFA CPTA ABDD CFHA FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHA DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD
CPND_LANG ENG
RCO 0
EFD 199
HUNT 199
EHT 199
LHK 0
PLEV 02
SPID NONE
AST 00
IAPG 0
AACS YES
ACQ AS: TN
ASID 16
SFNB 2 5 6 9 10 11 12 13 15 16 17 18 19
SFRB 1 2 15
USFB 1 3 4 5 6 7 9 10 12 13 14 15
CALB 1 3 4 5 6 8 9 10 11 12
FCTB
ITNA NO
DGRP
PRI 01
MLWU_LANG 0
DNDR 0
KEY 00 ACD 399 0 8239
AGN
01 MSB
02 NRD
03 SCR 436 0 MARP
04 TRN
05 ACNT
06 AO6
07
DATE 5 SEP 2007
NACT POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
VAS008 ADMIN VSID 9 CUST -- TIME & DATE 15:57:34 5/09/2007
TIM000 15:57 5/9/2007 CPU 0
AUD370 VSID 9 CUST --
TIM000 16:00 5/9/2007 CPU 0
