Call forward to external number and also dial specific number after hours Sl-1000

[zero5]

Hi all, I have a couple of issues

1) I want to use call forward from extension 200 to an external number (mobile phone)
When I press:
use Service code :
speaker 848 + 1 => Activate External forward
destination 9522xxxx speaker

and speaker 848 + 0 => Deactivate External forward use Service code

When I do this the call doesn't forward to the number
I have trunk to trunk active also.

All call come to ext 200 then forward when no answer to a group.
Should all the other extensions in the group also forward to the same mobile number?

2) After hours I want the system to be able to call only specific numbers.
Can the sl-1000 do this, if so how can I do this?

Thank you in advance

 

[telcoboy3]

Set up a virtual extension say 250. (Program 11-02 tells you the default virtual extension numbers)
Next for virtual extension 250
Program 22-09 (Call Forwarding Fixed Settings) Set the call forwarding to all.
02 thru 05 put in 9 plus the telephone number you want to forward to. Example 915557675555
Do not use any dashes or spaces. a comma is a pause.

Call forward the desk phone that needs to be externally forwarded to virtual extension 250.

For the After hours set up several virtual extensions call forwarded all to the cell phone numbers.
Press 1 for the 1st number, Press 2 for the second number, etc....

Good luck,

Telcoboy3

 

[Zero6]

Hi Telcoboy3,

Thank you for your reply, but are you sure about the program numbers, because when I look in my sl-1000 I see other settings.

Pls let me know if I am mistaken