Call Forward simple question

[CarlosPrex]

Problem: The system is Definity CMC R013. I need incoming calls go to attendant (ext. 151) and pressing a button ring on station 153. That´s all I need.

Actually, main DID has ars digit conversion, so is redirected to STATION 299 (Port X)and Coverage Path with Point1: 151

When the NS button is pressed only internal calls are redirected to station 153, outside calls remain on attd.
__________________________________________

The nearest I´ve been to find the solution to my problem is:

I gave station 153 a new COS with console permisions, and added a virtual station on coverage Path of station 299, so now Point1: 298, Point2: 151. This way incoming calls ring on attd (st 151) and if station 153 press FAC+298+153 ONLY INTERNAL CALLS ARE FORWARDED TO STATION 153 but outside calls are still ringing on attd (151)!

ANY HELP WOULD BE HIGHLY APPRECIATED.
Thank you in advance.
Carlos

 

[chilly1234]

Have you tried putting the Attd extn number in the coverage path rather than attd option?

 

[CarlosPrex]

I´ve solved my problem this way:

Main DID has ars digit conversion to STATION 299 (Port X)and Coverage Path with Point1: attd rings: 9, Point2:153.

This way, when the NS and POS-BUSY buttons are pressed, both internal and outside incoming calls ring directly on station 153. This work the way customer need it.

Thank you anyway.