Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Forward not working issue

Status
Not open for further replies.

tomkuk

Technical User
Aug 15, 2007
85
US
Hi all.

I have an issue where a number I can dial from my phone does not work when I set the number as FDN or a manual call forward.
Making a call to a colleague on the other site works perfectly, but when the same number is set as FDN or a manaul call forward I just recieve an unobtainable tone.

The number I am dialling is 865xxxxx

865 is a DSC and xxxxx is an extension on another site.

Any help woould be much apprichated. Thanks.

DSC 865
FLEN 8
DSP LSC
RRPA NO
RLI 50
NPA
NXX

RLI 50
ENTR 0
LTER NO
ROUT 123
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
FSNI 0
BNE NO
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO



ROUT 123
TYPE RDB
CUST 00
ROUT 123
DES VOIP
TKTP TIE
NPID_TBL_NUM 0
ESN NO
RPA NO
CNVT NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI2
ISDN YES
MODE PRA
IFC ESGF
SBN NO
PNI 00000
NCNA NO
NCRD NO
CTYP UKWN
INAC NO
ISAR NO
CPFXS YES
DAPC NO
INTC NO
DSEL VOD
PTYP DTT
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB NO
STEP
ACOD 1623
TCPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
MFC NO
ICIS YES
OGIS YES
TIMR ICF 1920
OGF 1920
EOD 13952
LCT 256
NRD 10112
DDL 70
ODT 4096
RGV 640
GTO 896
GTI 896


PAGE 002

SFB 3
PRPS 800
NBS 2048
NBL 4096

IENB 5
TFD 0
VSS 0
VGD 6
DTD NO
SCDT NO
2 DT NO
DRNG YES
NDRI 00
CDR YES
INC YES
LAST YES
TTA YES
ABAN YES
CDRB NO
QREC NO
OAL NO
CDRX NO
NATL YES
SSL
CFWR NO
IDOP NO
VRAT NO
MUS NO
PANS YES
RACD NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
ATAN NO
PLEV 2
OPR NO
ALRM NO
ART 0
PECL NO
DCTI 0
TIDY 1623 123
SGRP 0
ARDN NO
AACR NO


 
A couple of things you can try

Change '865' to a (TSC) Trunk Steering Code and see if that works
But my feeling is you can't Call Forward to a Steering Code

Maybe you could try forwarding to the Route ACOD (Access Code) and then the DN and make sure you have CLS 'CFXA' on the phone profile set

Cheers!!
 
OK so I have done some more testing.
I have another DSC 861 xxxx which works fine, I can set my call forward to 8616750 and it works fine.

Now I am using the same RLI and Route for the new 865 as I have always been using for 861, however the new DSC has an extra digit as the new site is using 5 digit extensions. Is there something in the RLI maybe that is affecting the number of digits string?

An issues has also transpired that sometimes when dialling 865 xxxxx the call fails, is there a timer or something in my programming somewhere that might need to be changed?

Thanks.
 
Check you DMI set in the RLI you may need another RLI and DMI specific to your new DSC numbers

Cheers!!
 
Thanks, but there is no DMI on this RLI. We send all digits to the gateway.
 
OK check DSC FLEN
Set up DCH Monitoring to see what sent out
What is the gateway ?

Cheers!!
 
The 865 DSC has a FLEN of 8. All extensions at remote site are 5 digits.
 
I can't seem to monitor the DCH?

err dtm020
DTM0020
Card is not configured.


ADAN DCH 53
CTYP MSDL
GRP 1
DNUM 9
PORT 1
DES VOIP
USR PRI
DCHL 53
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ESGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
QCHID YES
RCAP COLP NDI
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
 
It's really strange to me how it works sometimes and sometimes doesn't. :-s
 
This is for a call that failed...........

DCH 53 UIPE_OMSG CC_SETUP_REQ REF 000000CD CH 53 30 TOD 15:01:54 CK 4B493720
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:7023 NUM PLAN: PRIVATE TON: ESN CDP
CALLED #:86554000 NUM PLAN: PRIVATE TON: ESN CDP

DCH 53 UIPE_OMSG CC_RELEASE_RESP REF 000000CD CH 53 30 TOD 15:01:56 CK 4B493C


This is for a call that was successful.........

DCH 53 UIPE_OMSG CC_SETUP_REQ REF 000000CE CH 53 30 TOD 15:02:18 CK 4B49F121
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:7023 NUM PLAN: PRIVATE TON: ESN CDP
CALLED #:86554000 NUM PLAN: PRIVATE TON: ESN CDP

DCH 53 UIPE_OMSG CC_DISC_REQ REF 000000CE CH 53 30 TOD 15:02:22 CK 4B4A10F3
CAUSE: #16 - NORMAL CALL CLEARING

DCH 53 UIPE_OMSG CC_RELEASE_RESP REF 000000CE CH 53 30 TOD 15:02:22 CK 4B4A1151
 
Just cuz you can call it doesn't mean when you forward your phone to it that it will work. Please post your phone build as well.
 
The calls route and fail when just calling also, not just when trying to forward.
 
What 5 digits are they using at the other site if the number you are calling 865xxxx, is the 5 digits at the other site 5xxxx?
It sounds like you need a DMI that deletes the leading 2 digits .....
 
Extension range at other site is 50000-59999
 
865 XXXXX AND 861 XXXX both go to the same cisco voip gateway. 861 plus the 4 digit extension works perfect and has done for years. There is no dmi on the route for this e.g. DMI 0.

865 requires a 5 digit extension after it, the FLEN in the DSC accounts for this (flen 8), it then uses the same RLI and ROUTE as 861, but there are issues with a percentage of calls failing with NU tone.
 
Are you sure your phone programming is right? Please I ask again - post your phone build.
 
REQ: PRT
TYPE: TNB
TN 4 0 13 8
DATE
PAGE
DES

DES TECH
TN 004 0 13 08
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN 7878
TGAR 2
LDN NO
NCOS 7
SGRP 0
RNPG 99
SCI 0
SSU
LNRS 16
XLST 0
SCPW
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR PUA MTD FNA HTA TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNIA CDCA MSID DAPA BFED RCBD
ICDD CDMA MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD FITA CLTD ASCD
ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD CDMR
CPND_LANG ENG
RCO 0
HUNT 7878
LHK 0
PLEV 02
CSDN
AST 00
IAPG 1
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 7023 0 MARP
CPND
CPND_LANG ROMAN
NAME
XPLN 13
DISPLAY_FMT FIRST,LAST
01 ADL 12
02 ADL 12
03 MCR 7070 0 MARP
04 ADL 12
05 ADL 12 8614093
06 ADL 16
07 ADL 16
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12
13
14
15
16 MWK 7878
17 TRN
18 AO6
19 CFW 16 8614242
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31
DATE 1 FEB 2012
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top