Call Classifier limits

[notbrokedontchangeit]

Hi does anyone have a link to information regarding call classifiers, i.e. maximum simultaneous calls etc...
I have the hardware guide but it doesn't give me any ball park figures.
Thanks

 

[d3finity]

The S8700 IP-Connect does NOT share tone detection resources across PNs.

Accurately detecting call progress tones that have been possibly compressed by a voice coder like G729 is problematic --more so, if the network is lossy.

Instead of having a single pool of resources as in a traditional CSS or Multi-connect, there is a pool per PN.
(i.e. If you have a single IPSI and one TN744 in a Port Network, the total available for that Port Network only would be 16)

NOTE: The list measurement reports have not evolved to handle the difference -- disregard the "Total Avail" heading.

The same type of issue exists with G700/S8300s. The G700s have tone detection resources but they cannot be used by ports in traditional PNs or vice-a-versa.

Development has identified this issue, and it should be included in documentation shortly.