Burning failure

[Bro2]

I get burning failure in the end of nearly every burning session.
I had the same problem some time ago, I reinstalled win2k and I've been burning 100's of cd's since then with no problems....now the failures are back.
Using both memorex and mmore cd-r's, don't think they are the problem...not the burner either so must be some software problem.

It says illigal mode for this track and stops....always at 100%
I got a scsi plextor PX-R820T using latest nero

this is the log:

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 24.01.2003 17:55:59
Nero Version: 5.5.10.0
Recorder: <PLEXTOR CD-R PX-R820T> Version: 1.08 - HA 2 TA 4 - 5.5.10.0
Adapter driver: <aic78xx> HA 2
Drive buffer : 4096kB
Bus Type : default (0) -> SCSI, detected: SCSI
CD-ROM: <PLEXTOR CD-R PX-R820T>Version: 1.08 - HA 2 TA 4 - 5.5.10.0
Adapter driver: <aic78xx> HA 2
Bus Type : default (0) -> SCSI, detected: SCSI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-32AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CLB0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : IC35L120AVVA07-0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-104 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-R820T 1.08 aic78xx Port 2 ID 4 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 357MB (366512kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

24.1.2003
CD-ROM (ISO)
18:03:44 #1 Text 0 File Isodoc.cpp, Line 7328
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:03:45 #2 Text 0 File Reader.cpp, Line 115
Reader running

18:03:45 #3 Text 0 File Writer.cpp, Line 123
Writer PLEXTOR CD-R PX-R820T running

18:03:45 #4 ISO9660GEN -11 File geniso.cpp, Line 4519
First writeable address = 0 (0x00000000)

18:03:45 #5 Text 0 File Burncd.cpp, Line 3790
Turn on Disc-At-Once, using CD-R/RW media

18:03:45 #6 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356818 (356818) = #356818/79:17.43
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

18:04:00 #7 Text 0 File DlgWaitCD.cpp, Line 202
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 356817 (79:19.42)

18:04:00 #8 Text 0 File DlgWaitCD.cpp, Line 207
Write in overburning mode: FALSE

18:04:00 #9 Text 0 File DlgWaitCD.cpp, Line 1419
Recorder: PLEXTOR CD-R PX-R820T;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:04:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder PLEXTOR CD-R PX-R820T for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC &quot;&quot;, FilePos 0 307200 731070464

18:04:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356818 (356818) = #356818/79:17.43
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356818 blocks [PLEXTOR CD-R PX-R820T ]
--------------------------------------------------------------

18:04:01 #12 Phase 36 File dlgbrnst.cpp, Line 1649
Burn process started at 4x (600 KB/s)

18:04:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1952
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

18:04:01 #14 Text 0 File Mmc.cpp, Line 12522
StartDAO : CD-Text - Off

18:04:01 #15 Text 0 File Mmc.cpp, Line 12780
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 13 2b

18:24:43 #16 Text 0 File WriterStatus.cpp, Line 115
<PLEXTOR CD-R PX-R820T > start writing Lead-Out at LBA 356818 (571D2h), lenght 0 blocks

18:25:01 #17 SCSI -1047 File Cdrdrv.cpp, Line 1393
SCSI Exec, HA 2, TA 4, LUN 0, buffer 0x02690000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x71 0xCA 0x00 0x00 0x08 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x05 0x84 0x3F 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

18:25:01 #18 MMC -1047 File Writer.cpp, Line 331
Illegal mode for this track

18:25:01 #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

18:25:01 #20 Phase 38 File dlgbrnst.cpp, Line 1649
Burn process failed at 4x (600 KB/s)

18:25:01 #21 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 31.12.2002 13:19:35
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 31.12.2002 13:19:35
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00
File 'Drivers\aic78xx.sys': Ver=v2.20b, size=56848 bytes, created 06.12.1999 14:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


thnx for any reply's

 

[mksa]

Bro2,
I had a similar problem with a lite-on burner. I can't diagnose what the log file has generated, but getting rid of NERO fixed my problem. You might want to try some different burning software like Roxio or CloneCD.

 

[docpro]

I have purchased a composer Max by Primera Technologies. (4 Drive Robotic Duplicator. The drives are not recognized by Windows XP. I have reloaded the drivers several times(Note: the first module smelled burnt, then no drive recognition: Initially there was drive recognition. Drive order kept shifting on boot. First one drive, then three drives. The physical CDR drive on the PC is recognized by the Prassi software but does not recognize the TEAC 540E's). I received a replacement. Same thing. The port is firewire. Tested port with other devices and no problem.
Thanks Joel

 

[jimcr]

Do you have autorun turned on , if so before it writes the lead out your system is reconizing the CD and the software is aborting the writting process.

 

[Bro2]

Autorun?
hmm.....
didn't know there was a default autorun in Win2k....