I get burning failure in the end of nearly every burning session.
I had the same problem some time ago, I reinstalled win2k and I've been burning 100's of cd's since then with no problems....now the failures are back.
Using both memorex and mmore cd-r's, don't think they are the problem...not the burner either so must be some software problem.
It says illigal mode for this track and stops....always at 100%
I got a scsi plextor PX-R820T using latest nero
this is the log:
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 24.01.2003 17:55:59
Nero Version: 5.5.10.0
Recorder: <PLEXTOR CD-R PX-R820T> Version: 1.08 - HA 2 TA 4 - 5.5.10.0
Adapter driver: <aic78xx> HA 2
Drive buffer : 4096kB
Bus Type : default (0) -> SCSI, detected: SCSI
CD-ROM: <PLEXTOR CD-R PX-R820T>Version: 1.08 - HA 2 TA 4 - 5.5.10.0
Adapter driver: <aic78xx> HA 2
Bus Type : default (0) -> SCSI, detected: SCSI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-32AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CLB0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : IC35L120AVVA07-0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-104 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-R820T 1.08 aic78xx Port 2 ID 4 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 357MB (366512kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
24.1.2003
CD-ROM (ISO)
18:03:44 #1 Text 0 File Isodoc.cpp, Line 7328
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
18:03:45 #2 Text 0 File Reader.cpp, Line 115
Reader running
18:03:45 #3 Text 0 File Writer.cpp, Line 123
Writer PLEXTOR CD-R PX-R820T running
18:03:45 #4 ISO9660GEN -11 File geniso.cpp, Line 4519
First writeable address = 0 (0x00000000)
18:03:45 #5 Text 0 File Burncd.cpp, Line 3790
Turn on Disc-At-Once, using CD-R/RW media
18:03:45 #6 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356818 (356818) = #356818/79:17.43
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
18:04:00 #7 Text 0 File DlgWaitCD.cpp, Line 202
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 356817 (79:19.42)
18:04:00 #8 Text 0 File DlgWaitCD.cpp, Line 207
Write in overburning mode: FALSE
18:04:00 #9 Text 0 File DlgWaitCD.cpp, Line 1419
Recorder: PLEXTOR CD-R PX-R820T;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
18:04:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder PLEXTOR CD-R PX-R820T for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 731070464
18:04:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356818 (356818) = #356818/79:17.43
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356818 blocks [PLEXTOR CD-R PX-R820T ]
--------------------------------------------------------------
18:04:01 #12 Phase 36 File dlgbrnst.cpp, Line 1649
Burn process started at 4x (600 KB/s)
18:04:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1952
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
18:04:01 #14 Text 0 File Mmc.cpp, Line 12522
StartDAO : CD-Text - Off
18:04:01 #15 Text 0 File Mmc.cpp, Line 12780
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 13 2b
18:24:43 #16 Text 0 File WriterStatus.cpp, Line 115
<PLEXTOR CD-R PX-R820T > start writing Lead-Out at LBA 356818 (571D2h), lenght 0 blocks
18:25:01 #17 SCSI -1047 File Cdrdrv.cpp, Line 1393
SCSI Exec, HA 2, TA 4, LUN 0, buffer 0x02690000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x71 0xCA 0x00 0x00 0x08 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x05 0x84 0x3F 0x0A
0x00 0x00 0x00 0x00 0x64 0x00
18:25:01 #18 MMC -1047 File Writer.cpp, Line 331
Illegal mode for this track
18:25:01 #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
18:25:01 #20 Phase 38 File dlgbrnst.cpp, Line 1649
Burn process failed at 4x (600 KB/s)
18:25:01 #21 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 31.12.2002 13:19:35
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 31.12.2002 13:19:35
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00
File 'Drivers\aic78xx.sys': Ver=v2.20b, size=56848 bytes, created 06.12.1999 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thnx for any reply's
I had the same problem some time ago, I reinstalled win2k and I've been burning 100's of cd's since then with no problems....now the failures are back.
Using both memorex and mmore cd-r's, don't think they are the problem...not the burner either so must be some software problem.
It says illigal mode for this track and stops....always at 100%
I got a scsi plextor PX-R820T using latest nero
this is the log:
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 24.01.2003 17:55:59
Nero Version: 5.5.10.0
Recorder: <PLEXTOR CD-R PX-R820T> Version: 1.08 - HA 2 TA 4 - 5.5.10.0
Adapter driver: <aic78xx> HA 2
Drive buffer : 4096kB
Bus Type : default (0) -> SCSI, detected: SCSI
CD-ROM: <PLEXTOR CD-R PX-R820T>Version: 1.08 - HA 2 TA 4 - 5.5.10.0
Adapter driver: <aic78xx> HA 2
Bus Type : default (0) -> SCSI, detected: SCSI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-32AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CLB0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : IC35L120AVVA07-0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-104 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-R820T 1.08 aic78xx Port 2 ID 4 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 357MB (366512kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
24.1.2003
CD-ROM (ISO)
18:03:44 #1 Text 0 File Isodoc.cpp, Line 7328
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
18:03:45 #2 Text 0 File Reader.cpp, Line 115
Reader running
18:03:45 #3 Text 0 File Writer.cpp, Line 123
Writer PLEXTOR CD-R PX-R820T running
18:03:45 #4 ISO9660GEN -11 File geniso.cpp, Line 4519
First writeable address = 0 (0x00000000)
18:03:45 #5 Text 0 File Burncd.cpp, Line 3790
Turn on Disc-At-Once, using CD-R/RW media
18:03:45 #6 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356818 (356818) = #356818/79:17.43
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
18:04:00 #7 Text 0 File DlgWaitCD.cpp, Line 202
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 356817 (79:19.42)
18:04:00 #8 Text 0 File DlgWaitCD.cpp, Line 207
Write in overburning mode: FALSE
18:04:00 #9 Text 0 File DlgWaitCD.cpp, Line 1419
Recorder: PLEXTOR CD-R PX-R820T;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
18:04:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder PLEXTOR CD-R PX-R820T for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 731070464
18:04:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356818 (356818) = #356818/79:17.43
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356818 blocks [PLEXTOR CD-R PX-R820T ]
--------------------------------------------------------------
18:04:01 #12 Phase 36 File dlgbrnst.cpp, Line 1649
Burn process started at 4x (600 KB/s)
18:04:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1952
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
18:04:01 #14 Text 0 File Mmc.cpp, Line 12522
StartDAO : CD-Text - Off
18:04:01 #15 Text 0 File Mmc.cpp, Line 12780
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 13 2b
18:24:43 #16 Text 0 File WriterStatus.cpp, Line 115
<PLEXTOR CD-R PX-R820T > start writing Lead-Out at LBA 356818 (571D2h), lenght 0 blocks
18:25:01 #17 SCSI -1047 File Cdrdrv.cpp, Line 1393
SCSI Exec, HA 2, TA 4, LUN 0, buffer 0x02690000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x71 0xCA 0x00 0x00 0x08 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x05 0x84 0x3F 0x0A
0x00 0x00 0x00 0x00 0x64 0x00
18:25:01 #18 MMC -1047 File Writer.cpp, Line 331
Illegal mode for this track
18:25:01 #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
18:25:01 #20 Phase 38 File dlgbrnst.cpp, Line 1649
Burn process failed at 4x (600 KB/s)
18:25:01 #21 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 31.12.2002 13:19:35
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 31.12.2002 13:19:35
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00
File 'Drivers\aic78xx.sys': Ver=v2.20b, size=56848 bytes, created 06.12.1999 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thnx for any reply's