Anyone using a Broadband Router/Modem that supports BT ADSL (FTTC) without separate modem and also has a POE port that will power a Mitel phone, looking for recommendations thanks.
Nah just get a 5 port PoE switch and use that. I have never seen a BB router with PoE ports. Draytek are supposed to have one but I understand its about £700....gulp.
4 ports would probably be enough but 5 would be a better option, I have a Cisco 880 in my drawer which says it has 2 ports of POE but I was under the impression there was no firewall support on these and the point of this was to cut down on devices so I could end up in much the same situation.
Any one used a Ubiquiti ERPoe-5 as on a quick search it seems to have all the requirements but will have a further read up later.
Ubiquiti ERPoe-5 doesn't seem to support any broadband except maybe VDSL....so you should be OK. problems with throughput reported when bridging the ports to make it sork for FTTC though.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.