Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Boot Procedure

Status
Not open for further replies.

scuzi

IS-IT--Management
Jun 28, 2002
1
US
When I power cycle my SPARC 5, it returns to the
OK prompt. When I issue a reboot at the OK prompt,
Solaris then loads properly. Why doesn't Solaris
load when power cycled?
 
set the eeprom auto-boot? to true. as root:

#/usr/sbin/eeprom auto-boot?=true
 
Hi,

At the OK prompt type

printenv

This will show the you all the environmental variables one of them is auto-boot? if this is set to false set it to true by typing
setenv auto-boot? true

This will make the system boot to solaris when you powrerup or reboot.




 
You can also set the eeprom settings while system is running. Use /usr/sbin/eprom auto-boot? true and u r done!

Regards,

Hemant - Hemant
 
FYI..Not reboot but only boot at OK prompt.

uxadmin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top