Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blocking caller id single user 1

Status
Not open for further replies.
May 25, 2017
38
US
Wiring Closet,

I have a J169 phone running 4.0.4.0.10 Firmware. It is connected to an Avaya IP office 500 v2 that is running 11.0.4.1.13 build 1.

There is a similar threat, "Blocking caller id thread940-1460417" I have tried inhibiting and then allowing caller ID for one user on my system. I use both a user short code and an ARS as follows:
Code: XN; Telephone Number: NS8035551212 (valid DID changed for privacy) Feature: Dial 3K1 Line Group ID: 0.

When I make test calls I see an additional field on my calls from this extension: Pres=Restricted (1)

In context the entire setup of a call with no caller ID passed is:

CMSetup
Line: type=Q931Line 5 Call: lid=0 id=12767 in=0
Called[8035551213] Type=National (2) Reason=CMDRdirect Calling[805551212] Type=National Plan=ISDN Pres=Restricted (1)
BC: CMTC=3K1Audio CMTM=CallIndSigCon CMTR=64 CMST=Default CMU1=ULaw
BChan: slot=0 chan=23
Locale: enu


Here is an example of a call successfully passing outbound caller ID:

CMSetup
Line: type=Q931Line 5 Call: lid=0 id=12775 in=0
Called[8035551213] Type=National (2) Reason=CMDRdirect Calling[8035551214] Type=National Plan=ISDN
BC: CMTC=3K1Audio CMTM=CallIndSigCon CMTR=64 CMST=Default CMU1=ULaw
BChan: slot=0 chan=23
Locale: enu

Is there some way the user inadvertently restricted caller ID on their set? Why is the first call Pres=Restricted?
 
Got some help on this one: I found that by adding an A to the telephone number string in my ARS table ex: Telephone Number: NSA8035551212, allowed the outbound caller ID to be passed. Side note: when I added the lower case i, EX: NSiA8035551212, my out bound caller id Name was inhibited.
 
Not sure if this applies to your situation but there is a setting on the phone that blocks caller ID.

Features
Call Settings
Withhold Number

We have users do this from time to time and then wonder why they are having problems.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top