I have been working on an e-Machine, Monster 500 comp. for my daughter. It works well except when I power down the machine. Then the pwr and hdd led lights start blinking and if they blink rapidly the cpu and pcu fans spin but not at full speed. If they blink slow the fans just wiggle.
I have reseated the cpu with artic silver that did not help.
If I change the power setting it changes the blink rate and I found that if I set the power settings to always so they do not start for 2 or 3 hrs. after I shut down.
Is this a power supply problem?
Thank you, Doss
I have reseated the cpu with artic silver that did not help.
If I change the power setting it changes the blink rate and I found that if I set the power settings to always so they do not start for 2 or 3 hrs. after I shut down.
Is this a power supply problem?
Thank you, Doss