Hello all
I am try to trunk a 3524 to my 6513 (Native IOS) here is the setup
3524
fa 0/24
speed 100
duplex full
switchport
switchport access vlan 80
switchport trunk native vlan 80
6513
gig 1/38
no ip address
speed 100
duplex full
switchport
switchport access vlan 80
switchport trunk native vlan 80
switchport mode trunk
I am using a X-over cable between the switches but the light on port 0/24 keep blinking getting a up, up buit cant get to any deives on that vlan.. any thoughts ..
THX>...
I am try to trunk a 3524 to my 6513 (Native IOS) here is the setup
3524
fa 0/24
speed 100
duplex full
switchport
switchport access vlan 80
switchport trunk native vlan 80
6513
gig 1/38
no ip address
speed 100
duplex full
switchport
switchport access vlan 80
switchport trunk native vlan 80
switchport mode trunk
I am using a X-over cable between the switches but the light on port 0/24 keep blinking getting a up, up buit cant get to any deives on that vlan.. any thoughts ..
THX>...