BLF and Park on Polycom SIP phones 2

[kevykevg]

Has anyone been able to get either BLF or Park buttons on a Polycom Soundstation phone to work with the IP Office?

 

[tlpeter]

You can't do that.

BAZINGA!

I'm not insane, my mother had me tested!

 

[kevykevg]

So there is no way through the sip.cfg file to do this?

 

[tlpeter]

I just saw it is a sip phone so then it should be possible.
The sip softphone can do it too.
But i have no clue how it is done.


BAZINGA!

I'm not insane, my mother had me tested!

 

[kevykevg]

Thanks for the help, hopefully someone out there has done something with the Polycoms that may be able to assist.

 

[fshaw]

We just did some testing with Polycom SIP phones for a demo. We used phone manager for both park and blf without issues. We did have some issues trying to use phone manager pro to listen to a message. I would assume that one-x portal can also do this for you, but did not attempt it.

Good luck,
Frank

 

[Bas1234]

This is how it works for the SIP stack (i think), but not supported on Avaya for now.

http://www.3cx.com/blog/voip-howto/busy-lamp-field/

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________