I recently got a new backupserver with BE10, and a large RAID5. I'm currently setting it up/testing, but to my big concern, I only get around 300-400MB/sec when running a backup-to-disk job between the backupserver and my fileserver. Both servers are 2.8 Xeons and both have gigabit NICs.
I have tested to copy a 500MB file between the two servers and an internal gigabit FTP server. The speeds I get there, is:
Backupserver2: upload a file to the ftp = 30mb/sec, get a file from the ftp = 23mb/sec.
Fileserver: upload a file to the ftp = 32mb/sec, get a file from the ftp = 34mb/sec.
As far as I can see, these speeds are OK. Does anyone have any clue about what I can do to get better speeds i BE?
Best regards,
Einar
I have tested to copy a 500MB file between the two servers and an internal gigabit FTP server. The speeds I get there, is:
Backupserver2: upload a file to the ftp = 30mb/sec, get a file from the ftp = 23mb/sec.
Fileserver: upload a file to the ftp = 32mb/sec, get a file from the ftp = 34mb/sec.
As far as I can see, these speeds are OK. Does anyone have any clue about what I can do to get better speeds i BE?
Best regards,
Einar