BCMR V2.4

[mojoputter]

Has anyone installed or administered a V2.4 BCMR.? and do you know where I can get a current document to do the admin to a S8700 to connect to the BCMR.

 

[wayneled]

any luck with this?

 

[Konri]

what do You need to know?
Did You install bcms server?
Did You connect it to clan ip-address?

 

[Telerious]

If you can be more specific, that would help, if you're looking for general info, there's a lot on the doc site at Avaya...

Here are links to docs

Operations:

http://support.avaya.com/elmodocs2/cms_r13/07-300061_i5_bcmsops.pdf

If you'r not using rev 314, then update the connection server:

http://support.avaya.com/japple/css...eID=310233&temp.bucketID=108025&PAGE=Document

Installation:(for r2.0)

http://support.avaya.com/edoc/docs/bcms/585217103_1.pdf

And lastly, a flurry of docs on 2.3

http://support.avaya.com/japple/css...oductID=107671&temp.releaseID=146118&x=12&y=7

 

[Telerious]

Oops, forgot to add the users guide too:

http://support.avaya.com/elmodocs2/bcms/bcms_vu/585217102_3.pdf

 

[wayneled]

all the above docs refer to pre-rel CM4. the problem is that when the server tries to connect to the pbx, I get an error that the BCMR login I made with prof18, doesn't have the right permissions. the docs all refer to CM3 or below. not any help with the new way to add logins with R4

the software release of the BCMR is 2.4.

i also applied the patch from above to no avail.

sorry i should have been more clear to start with.

thanks for all the replies

 

[YeOldPhoneGuy]

Installed a R2.4 on a CM and had the login problem. Installed the patch and it was them successfully able to login.

Me

 

[BolivianFast]

What patch installed you?

 

[Telerious]

You may need to update the driver for the dongle (sentinel rainbow usb), use system, device manager to do this, and find the driver in the sentinel folder below the server folder on the BCMS install disk.

Additionally, I found that if you just ignore the error message, it works. So, the error message, could be an error in and of itself - give it a try.

 

[wayneled]

you are correct. just ignore the error message and it works. I wasted a lot of time on that one. lol

thanks for all repsonses

 

[Pepperz]

Will the BCMR work with EAS ?

 

[multibus2]

Yes it does work with EAS

"Been there, done that and got the teeshirt