Hello, I am having trouble getting a BCM50 Rls 3.0 to dial out over it's VoIP trunks to other sites which include other BCMs and also CS1000. I have it registered with the NRS and can call it from the CS1000 side.
When I try to call the CS1000 from the BCM50 or one of the other BCM site from the BCM50 I get dead air for about 8 seconds and then a fast busy. I have the DNs for the other sites setup as wildcard dest codes. One of the sites is all 6s so I setup 6A and pointed it to route 002 which is line pool BlocA (VoIP trunks).
H323 settings are gatekeeper resolved, CSE protocol. Private network is 4 digits, PNI is 1. I checked the PNI on the CS1000 side and it is also 1. I setup about 20 BCM200 running 3.7 last summer and got this working in a similair setup, so I am not sure what is missing.
I also checked my codec settings, they are the same. I am also using the alias syntax of NAME:system name. Any ideas?
When I try to call the CS1000 from the BCM50 or one of the other BCM site from the BCM50 I get dead air for about 8 seconds and then a fast busy. I have the DNs for the other sites setup as wildcard dest codes. One of the sites is all 6s so I setup 6A and pointed it to route 002 which is line pool BlocA (VoIP trunks).
H323 settings are gatekeeper resolved, CSE protocol. Private network is 4 digits, PNI is 1. I checked the PNI on the CS1000 side and it is also 1. I setup about 20 BCM200 running 3.7 last summer and got this working in a similair setup, so I am not sure what is missing.
I also checked my codec settings, they are the same. I am also using the alias syntax of NAME:system name. Any ideas?