Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50-1 Analog fax on main unit

Status
Not open for further replies.

mackk

Technical User
Oct 23, 2006
15
UA
Hi,
Im connect analog fax and analog modem to main unit BCM50(ver.1).Im use analog line. I have problem.Each from 10 attempts of 1 times it is connected correctly.
Without BCM, fax and modem work propertly.
Someone solved such problem?
 
are you useing the on-board ATA or are you using external ATAs
 
sounds a silly question but have you put the keycode for the Onboard ATA

if you have i will try it when i get in the office on monday/tuesday

one thing that you could try is put an external ATA on one of the digi ext and try that, that will tell you which side of the BCM you are haveing the problem i.e FXO / FXS
 

i have keykode for internal 4 ATA.
i instll all patches from nortel.com
incoming fax recieved - no problem, but outgoing fax very bad. Im tried panasinic ft-78 faxmashine, and HP-multifunction.

Now, i dont have external ata...



 
What kind of lines are you using.If Pri make sure the timeing is correct.
 
If you connect an analoge phone to the bcm , and make a test call to an external number , is the line clear ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top