Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM450 Changing Line Pool for many DNs
- Thread starter RD1234
- Start date
You can copy the Line Access parameters, but this also means any lines assigned to the set you are copying from get copied as well. Otherwise, no.
What I normally do is assign multiple line pools (thinking of possible future requirements), Pool A, B, C, Pri-A, Pri-B or BlocA, BlocB, BlocC to one set then copying before I do any target line programming. But this needs to be done when initially configuring a system.
--DB
What I normally do is assign multiple line pools (thinking of possible future requirements), Pool A, B, C, Pri-A, Pri-B or BlocA, BlocB, BlocC to one set then copying before I do any target line programming. But this needs to be done when initially configuring a system.
--DB
- Status
Similar threads
- Locked
- Question
- Locked
- Question