Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bcm 50 stopped working 2 amber lights
- Thread starter Alpha500
- Start date
curlycord
Programmer
Sounds like Hard Drive
It's still possible to retrieve the key codes from KRS.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
It's still possible to retrieve the key codes from KRS.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
- Thread starter
- #3
Starting with release 5, the keycode file is stored in the BCM50 on a flash device. If you get a new hard drive with the same release version (or the multi-image drive and convert it to the correct release), the BCM software will use the keycode file from the flash (i.e., no need to use KRS or purchase a new system).
curlycord
Programmer
No you cannot as the codes are generated against the system id of the cabinet, a ticket with Avaya would need to be generated to transfer the codes over to a new system id.
Contact me for more info if need.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
Contact me for more info if need.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
Firebird Scrambler
Systems Engineer
The important thing here is to see if you can get it working again and do a full backup as this will save the database and keycode.
Assuming that it's the hard drive that is failing as it is usually the case as the Motherboard rarely fails, then your best option is to find out about getting another image for the BCM 50 at 6.0 and then doing a full restore from your backup.
It will probably be the quickest and cheapest option. If you are in NA, then contact Curly and if in the UK, then try me.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
Assuming that it's the hard drive that is failing as it is usually the case as the Motherboard rarely fails, then your best option is to find out about getting another image for the BCM 50 at 6.0 and then doing a full restore from your backup.
It will probably be the quickest and cheapest option. If you are in NA, then contact Curly and if in the UK, then try me.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
bcmfiftyfan
Programmer
I replaced a hard drive on a bcm50 version 6 with a multi-image drive last week and the keycodes remained intact.
- Thread starter
- #8
curlycord
Programmer
You mean Release 3
Version is 6.0.2.05.237.
Backup and Restore works on all releases but as long as you restore to the same release as was.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
Version is 6.0.2.05.237.
Backup and Restore works on all releases but as long as you restore to the same release as was.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
- Status
Similar threads