BCM 50 R5 - Manually Adding Keycodes using Element Manager 1

[colotelco]

BCM 50 R5


Having problems with finding the "Modify Features Licences Table"

Following directions:
1) TASK NAVIGATION
2) CLICKED ON " CONFIGURATION "
3) CLICKED ON " SYSTEM "
4) CLICKED ON " KEYCODES "
5) I see two methods of entering the keycodes " Load from file " and "connect to Nortel "

but I do not see the " MODIFY FEATURES LICENCES TABLE " BUTTON...

what am I missing ???

 

[unclegeoff]

Hi,
Are you using Element Manager from your desktop or are you browing to the system via IP address and using Element Manager from there?

 

[dwpoole]

Keycodes can not be manually entered on BCM R5. You will need to obtain the license file.

 

[stsguy]

can't you still do it from a telset using f9*8

WORK SMART NOT HARD

 

[PhoneTech9774]

there is no manual keycode input in BCM50 Rls 50
Feature 9*8 Rsl 5.0 Menu Tree

User Accounts
Accounts
Create
Delete
Password
Change

IP Address
IP (Displays Current Settings)
IP Address
Subnet Mask
Default Gateway
DIS (Disable DHCP & Enter New IP Settings)

Modem
Enable
Disable

System Restart

 

[colotelco]

sent in the auth codes and sys. id. -
received my license file and entered -
worked like a charm.....

Thanks DWPoole

and Phonetech9774 - I will check out what you posted...
Thanks again !!!!