Can anyone tell me how many DSM 32's I can install in a BCM 400 and what the dip switch settings should be? I am trying to add a 3rd DSM32 to a BCM but cannot get it to work.
Wrong forum but it depends on the other cards installed. You can have 6 resorces a 32+ will take up 1 a DTM=1 GATM8=1
What do you have now.And what are they.
Thanks Cook, I saw your reply in the correct forum also, thanks for that as well.
This bcm has a T1 and 2 DSM32's, I removed the GATM8 they were not using to make room for the 3rd DSM32 but the bcm will not recognize it. I suspect I have the dip switches set incorrectly. Where can I find the Doc's you are referring to in the other forum?
Were you able to find the dip switch setting? You have to do a couple of things besides set the dip switches, you also have to go into resoreses and tell the bus that it is not going to be a GATM anymore and that it is a DMS 32+
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.