Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 Log inbound calls

Status
Not open for further replies.

arell12

Technical User
Feb 17, 2005
48
CA
I have been asked if there is a way I can log all inbound calls that reception gets. We have 2 phone numbers that go to the reception desk , a local number and a 1800 number and they want to know the call volume that is going through there. Is there any way to log this?

Thanks
 
Yes, CDR (Call Detail Recording) is inherent in the BCM. But, you will need some Call Accounting software to make it usable.

Adversity is Opportunity
 
go to and download the 30 day version of Tapit.

You'll need to download their smdr monitor specific to the release of the bcm that you are using.

I'm testing it right now and it works pretty well.

Chris
IT Manager
Houston, Texas
 
I was reading about CDR and I was under the impression that it only logs outgoing calls? Is this wrong? What sort of call accounting software would I need?
 
Logs inbound and outbound as well as transfers.

Detail Activity by User
14-May-08 12:00 From 05/14/2008 To 05/14/2008
Location: Main
Buckley Eli 05/14/08 11:03 0:00:18 IX 281xxx7898 $0.00 - HOUSTON SU, TX
Buckley Eli 05/14/08 11:09 0:00:14 IXC 281xxx4841 $0.00 - SPRING, TX
Buckley Eli 05/14/08 11:31 0:01:45 IX 713xxx9904 $0.00 - HOUSTON, TX
0:23:49 $0.00
Totals for Buckley Eli
Calls : 28 Time : Avr. Len : 0:00:51 Cost : Avr. Cost: $0.00
User
* I-Inbound, O-Outbound, N-iNternal, X-Transfer, C-Continued, A-Abandoned Page 5 of 42

This is a lot more formatted but you get the idea.

Chris
IT Manager
Houston, Texas
 
I have my PBX to push the CDR data to a FTP server now is this how it should be done? Then I need to get some call accounting software to read that CDR data? I have the CDR data in norstar format right now will tapit read that?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top