Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 element manager Password

Status
Not open for further replies.

Savataj

Technical User
Oct 12, 2006
39
JO
hi all,

i have a BCM 400 Rls 4.0 and i cant access the system using the element manager, my client told me that he didnt change the password and i didnt change it too, so is there anyway to access the system by using any other password from nortel or i can rest it from telset ...


thanks for help
 
Can you get to the Browser page using the IP address or ping it.
 
but i can get access, cuz the password is not working
 
Did you try the default password?

You could try rebooting the BCM and then try the password.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
im trying to use this one PlsChgMe! which is the default one
 
what if the client changed the password and forgot it .... what can i do in this case ...is there any default password from nortel to access the system .
 
Tell them they better remember it or the system will need to be reprogrammed from the beginning.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
i c .... but in my case i think i can config the system again ...but how can i rest it to default
 
There is no reset button, nor backdoor reset. You need to re-image the hardrive. Itas can get you a password of the day, but that costs big $.

Adversity is Opportunity
 
Got this from (madwok) So if you use this make sure you have the KeyCodes first

If you do a level 2 reset by using the paper clip on the recessed push pin , you will default the BCM50. You will lost all the programm & keycode . The only thing that was intacted is the software patches but you can regain the nnadmin with P********

You can refer the level 2 reset procedure from the BCM50 CD or online document . Basically just push when system change status boot up diagnostic light change .





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
I should have had a V8 this morning. Bad short term memory.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
ace I tried the reset like you suggested a while back and it never worked for me on the 50.
I wish it did!!
I have a BCM50 I can get in via telset but not element manager
User and password

It's only dialtone-VZ
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top