Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Basic VM,AA Access remotly

Status
Not open for further replies.

cook1082

Vendor
Mar 3, 2006
3,596
US
I have a Basic IPO with the AA picking up, how do you access the Mailboxes remotely.
 
For remote you need to dial 778 and not 777

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool )
______________________________________
 
When I try the 778 or 777 I get Invalid Entry try again.
I did figure how at least to get to VM by getting the Extensions VM greeting and when the beep sounds to leave a message Pressing The # key you get a prompt to press *R then is says to enter the Ext. number then the access code/Password then you get in.
It seems like a long way to get you messages.
 
you can take a prompt from the main AA that isn't used, transfer it to *17 or a vmail collect shortcode. I use *98|Voicemail Collect|?
inform staff to enter that prompt when they call in, they will than be prompted to enter a mailbox number and password.
all mailboxes should have a password created.
 
I think that is for IPO embedded not Basic it doesn't have the same codes. Thanks though.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top