Hello,
I tested the multiplexed backup.
The backup process was ok and faster than the "normal" way.
A solution to reduce our backup time.
I meet SCSI problems when I try to restore it.
Restore to F:\TODELETE\Test Restore\Multiplex\Gej512
E6304 Unexpected SCSI Sense Code ==> JobID[813], Device[5], ABSL[4 0 2 0], SN[PMC07H0116 ], CMD[34h], [Scsi Bus Reset Occurred], ASC[29], ASCQ[02]
E6300 Windows NT SCSI PORT Error
E3713 Unable to read from media. (MEDIA=T, EC=Hardware Error)
AE0076 Invalid stream id signature: 0x484a206b
3734 file(s) 2066134 KB restored from TEST @ 177,398 KB/min
204 Directories 3.734 File(s) (1.863,37 MB) Restored to Disk.
1.961,00 MB Read from Media.
Elapsed Time: 11m 39s
Average Throughput: 168,32 MB/min
Number of Error(s)/Warning(s): 3.632/0
** Summary for Job **
1 Session(s) Found on Media.
204 Directories 3.734 File(s) (1.863,37 MB) Restored to Disk.
1.961,00 MB Read from Media.
Elapsed Time: 11m 39s
Average Throughput: 168,32 MB/min
Number of Error(s)/Warning(s): 3.632/0
Restore Operation Failed.
[JOBQUEUE]: Status changed from Active to Done. [Job No: 2] [Description: Restore By Session Multiplex Job]
I got the E6300 a few time ago. It has been solved by setting the good SCSI ID's and IRQ (lowest level).
It has disepear after.
I'm using BABv11 on Win2k SP4 (Up to date regarding windows update) with an HP MSL5026 (2 SDLT1 drives)
Any suggestions?
I thank you a lot in advance
Fredje