That ST3146807FCV with D010 is not the correct F/W
for Clariion or CX. D010 is a Symmetrix DMX drive.
They are not interchangable.
Correct CX/Clariion firmware is 7A04 or higher.
The firmware file is impossible to get out of EMC.
If you find it. It will have a .lod file extension.
fdf. download files will not work. They are for drives
that are mounted and bound to an array and are flashed
via navisphere or CLI.
Thanks for the information, I have the file .fdf but I could not get it to work. I thought I was only for upgrading firmware to drives that already have the EMC firmware in it.
.fdf files load only on drives that
are of the proper EMC family.
Drive must be online and bound.
And only via the native system.
So a Symmetrix drive D010 cannot be flashed on a
Clariion system and vice a versa.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.