Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya VoIP Monitoring Software

Status
Not open for further replies.
Nov 2, 2005
228
US
Anybody have this working? I just built a new Windows 2003 server to load the software on there and for some reason it cannot find any endpoints.

Here are my specs...

Windows 2003 Server Standard SP1
SQL Server Express with SP2
Avaya VoIP Mon 4.0
Avaya S8500 4.0.1
Avaya 4621 and 9640 End Points

Yes my IP-Network-Region and sys-param IP-Options forms are filled out.

Thanks for your help!

The Radio Revolution has begun....
Avaya Certified Expert
Cisco Certified Network Associate
Juniper Certified Internet Associate
Microsoft Certified Professional
 
I ran into an issue with the default database password for the VoIP Monitoring Manager not meeting the OS Security Policy requirements. There is a database script file (I can't give you the name because I don't have it loaded right now) where you can edit the password and then you should be able to re-run the script to create the database structure.

Alternatively remove the Security Policy restrictions for password complexity then load the software then restore the policy.

James Middleton
ACSCI/ACSCD/MCSE
Xeta Technologies
jim.middleton@xeta.com
 
Interesting James. I had my SQL password set to Avaya2007. Ill try throwing a special charachter in there and see what happens.

The PBX is definately sending out the info though because I put a sniffer on the Windows server and it see's all the traffic coming in from the IP phones on port 5005.

The Radio Revolution has begun....
Avaya Certified Expert
Cisco Certified Network Associate
Juniper Certified Internet Associate
Microsoft Certified Professional
 
Yes its a monitoring tool.

Jim,

I reloaded the entire server and reloaded the VOIP manager. I used Av@ya2007# as my SA password for the SQL server. Now I didnt load any service packs for the SQL server this time but would that really be causing the issue. Im still getting the same issue when trying to search for endpoints. I get the pop up that says no endpoints found.



The Radio Revolution has begun....
Avaya Certified Expert
Cisco Certified Network Associate
Juniper Certified Internet Associate
Microsoft Certified Professional
 
i have the same issue have you resolved this
kind regards
 
No I havent. Ive reloaded on an XP machine as well and had no luck there. Tried a different VoIP Mon CD still get the same error. No endpoints found.

I think I've just about given up.

The Radio Revolution has begun....
Avaya Certified Expert
Cisco Certified Network Associate
Juniper Certified Internet Associate
Microsoft Certified Professional
 
I have no experience with this package, but my generic suggestion would be to install wireshark ( (it used to be named ethereal). Wireshark is a packet sniffer and it often helps me understand what is and isn't working for a network application.

steve
 
I am running in to the exact same thing... Any luck finding the problem? Wireshark shows traffic coming in to the NIC... VMM just seems to be ignoring it.
 
No I havent had any luck. I put ethereal on my port and I see the PBX sending out the information to the server but I cant see anything in the VMM. Exact same issue you are having.

I've pretty much given up on it. If you find a fix please let me know.


Thanks.

The Radio Revolution has begun....
Avaya Certified Expert
Cisco Certified Network Associate
Juniper Certified Internet Associate
Microsoft Certified Professional
 
Did you go over the VMM installtion procedures?

"Page 17 of 14-300446 Issue 3, March 2007, Avaya Integrated management Release 4.0 VoIP Monitoring management Installation and Upgrade"


You have to make sure the SNMP Service is installed and working, and then you MUST configure a community name with read-write community rights... after I do that, it usually comes up right away, after a reboot :)

mitch


AVAYA Certified Specialist
 
I have rebuilt a server with a clean install of W2K3 on it. Popped in the VMM software and loaded it. During the installation it asks for the W2K3 CD so that it can load the SNMP service. Once I do that I create a SNMP community name of private with read/write access. Still nothing. I've done this oh about 30 times and it never works.

The Radio Revolution has begun....
Avaya Certified Expert
Cisco Certified Network Associate
Juniper Certified Internet Associate
Microsoft Certified Professional
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top