TipOfTheIceberg
Technical User
Hello,
I have an Avaya Partner ACS R5 (flashed to R6) and a large Voice Messaging PC Card connected on PC Card slot 2. The messaging system has worked fine with few issues, but recently I have been experiencing an issue. When a call is picked up by the voice messaging for voicemail or the system's auto Attendant, in the middle of the Auto Attendant prompt it will unexpectedly be transferred (I do not know which extension it is being transferred to, not one connected to a phone as far as I am concerned) to an extension which is not part of the Auto Attendant selector codes 1, 2, or 3. In addition, when the call is transferred the caller does not hear hold music, which is what is supposed to happen (according to the system programming). Instead, they hear the normal ringback tone. This has happened repeatedly for no apparent reason and completely spontaneously, despite turning on and off the system, removing and reinserting the PC card, as well as assigning and unassigning the Auto Attendant. Has anyone else experienced this issue? If so, any help is much appreciated. Have a good day.
I have an Avaya Partner ACS R5 (flashed to R6) and a large Voice Messaging PC Card connected on PC Card slot 2. The messaging system has worked fine with few issues, but recently I have been experiencing an issue. When a call is picked up by the voice messaging for voicemail or the system's auto Attendant, in the middle of the Auto Attendant prompt it will unexpectedly be transferred (I do not know which extension it is being transferred to, not one connected to a phone as far as I am concerned) to an extension which is not part of the Auto Attendant selector codes 1, 2, or 3. In addition, when the call is transferred the caller does not hear hold music, which is what is supposed to happen (according to the system programming). Instead, they hear the normal ringback tone. This has happened repeatedly for no apparent reason and completely spontaneously, despite turning on and off the system, removing and reinserting the PC card, as well as assigning and unassigning the Auto Attendant. Has anyone else experienced this issue? If so, any help is much appreciated. Have a good day.