Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya IPOffice 500v2 sip trunking to mitel 3300

Status
Not open for further replies.

tke837

Programmer
May 14, 2013
26
US
Has anyone successfully been able to integrate a 500v2 and mitel 3300 through sip? I can successfully dial 7 plus 4 digit extension from Mitel and get someone on 500v2 end. However I cannot dial an extension from the 500v2 to the mitel. It errors out on my end but logs show that it is communicating with mitel, but it just doesn't complete. To throw more confusion into the mix the customer is using sip trunking for dial tone. Now I can take a DID and point it to an extension on the Mitel and the call completes. I can also call into the AA in the 500v2 and dial an extension on the mitel and the call completes. However if i hit the AA through a short code and dial an extension on the mitel it errors out. At this point i cannot get over this hump. Any ideas??
 
Show us the shortcode you use on the IPO to the Mitel

BAZINGA!

I'm not insane, my mother had me tested!

 
Ive used a couple different variations:
76xxx
Dial and dial ext
6N
99 (Sip line outgoing) I also tried it by building and ars instead of outgoing sip line id
 
What about 6N@xxx.xxx.xxx.xxx

BAZINGA!

I'm not insane, my mother had me tested!

 
Sorry, that needs to 6N"@xxx.xxx.xxx.xxx"


BAZINGA!

I'm not insane, my mother had me tested!

 
This will be the Mitel not playing nice, they are finicky things at best :)

 
tipeter thanks for recommendation that fixed my out bound issue. Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top