Avaya IPO 9.1.5 with Avaya D100 SIP Dect Paging restarts the D100

[P12ash]

Hi Guys

I've installed the following system at my client's site but having trouble using Paging from the D160 Dect handset. I've configured a short code on the IPO for paging to Hunt group 200 which all phones are a member

Whenever I do a page from the DECT D160 phone its restarts the D100 and all phones show connecting. If I do the page from a Avaya 1616 the fixed phones work fine but the D100 restarts.

Current Configuration

IPO500 V2 with BRI combo card (With 10 VCM)
Essential's License
4 x IP 1616 Handsets
7 x D160 Handsets
11 x Avaya IP Endpoints

Could the problem be caused by that I have 10VCM but total 11 IP Phones (4 1616 7 7 D160 DECT)

Thanks Guys

Prash

 

[derfloh]

So did you try to reduce the the paging group size to ten or less?

 

[rdoubrava]

Paging to IP phones without enough VCM channels with cause the IP office to reboot.