Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AVAYA I210 and BCM450

Status
Not open for further replies.

penroy

MIS
Feb 12, 2006
116
JM
I have some new AVAYA I1210 phone to con figure for a BCM450 but I am unable to get into the configuration to setup the phones. From what I am seeing it seems the firmware are different is there a way to down-grade the firmware.
 
Take a look under the Services Menu (The button should have a world icon)
 
An out-of-box 1210/1220/1230 has a limited "bootloader" software on it. It needs to connect to the BCM in order to download a full set of software.
 
gwebster,

How do I get it connected to the BCM to get the full software. I have been trying without much success.
 
apply latest patches to the bcm which have the fix to load the correct firmware.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top