Schlickieboy
Technical User
Can a 9611 auto call a specific number once the receiver is lifted? This is one thing I have not done.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya 9611 to auto dial once receiver is lifted.
- Thread starter Schlickieboy
- Start date
- Status
smokinjoe2938
Programmer
what is your software release, on our 6.3 we can do a change system parameters special features and on page 6 set hot line for ip phones to yes and then define your hotline destination on page 1 maybe use you personal list
- Thread starter
- #3
Schlickieboy
Technical User
I found and ticked the box, but where would I go from there. I understand the personal list but how do i Activate the phone for a hotline??
smokinjoe2938
Programmer
ok here we go 1st do a change abbreviated dialing personal enter your extension number and then hit return ket on line 01 enter 9 for outside line followed by cell number now save, next cha sta your extension number, on page 4 at hot line destination at abbreviated list number enter 1 for dial code make 01, Also make sure list 1 is personal on page 4 of your station form, you can define it against a group list or system list as well, good luck.
- Thread starter
- #5
Schlickieboy
Technical User
sorry, I did some digging and got it working. Put on a personal list... Thanks for the assist.
smokinjoe2938
Programmer
what do you mean you did some digging? I dug the hole for you all you had to do was climb in.
- Status
Similar threads
- Locked
- Question