Audix Slim to UK Tracker Pin Outs

[Sircrimpalot]

Does anyone know the pin outs for the 25 way to 9 way lead that goes between the octopus cable on the back of a TN568 and the tracker?
Any help much appreciated.

 

[4merAvaya]

https://support.avaya.com/css/P8/documents/100011595

Page 48 has the generic connections. Let me know if you need more detail.

Kevin

 

[Sircrimpalot]

Thanks but I was after the specific pinouts of the cable i.e. pin 2 on 9 way goes to pin 3 on 25 way etc.just for the lead betwwen the Audix and the tracker. Is it the same as the lead between the processor and the tracker? if so I can bell that lead out and copy the pins. The original lucent lead seems to have gone walkies!!!!!

 

[4merAvaya]

To connect the Definity Audix alarm relay to an alarm device:

1. Connect the DEFINITY AUDIX system cable to the cross-connect field. Attach the male amphenol connector on a Group 300 cable to the female amphenol connector on the system cable. The other end of the Group 300 cable should already be attached to the cross-connect field.

2. Perform the cross-connects for the alarm origination/remote maintenance access connection using the pin-outs listed below.

Pin Definition
22 relay contact
47 relay contact

3. Connect the alarm device to the cross-connect field.

You can connect the switch alarm to the DEFINITY AUDIX alarm relay or to a different device such as a warning light or buzzer.

 

[Sircrimpalot]

I have found the pinouts and made up a cable which works:-

Pin setup is:

25 Pin Connector (Male)

Red - Pin 2
Blue - Pin 3
Green - Pin 5
White - Pin 6
Yellow - Pin 7
Black - Pin 8
Brown - Pin 20

9 Pin Connector (Female)

Red - Pin 2
Blue - Pin 3
Green - Pin 4
White - Pin 6
Yellow - Pin 5
Black - Pin 7
Brown - Pin 8
Shield - Pin 9 (If Present)