Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Audix LX 2.0 - Only 2 of 4 channels answering

Status
Not open for further replies.

AvayaEng

Technical User
Oct 19, 2005
37
ZA
We have recently replaced an Audix LX 1.1 with Audix LX 2.0.
Yesterday channels 2 and 4 where answering and now today only 1 and 3. You can see the non answering channel been active in Channel monitor but it does not answer. Please could you possibly advise where we can look
 
Thansks , we have and confirmed that there is dial tone
 
check that the lines are in the right order ie the first extension in the hunt group is the first port on the audix
 
Thanks, we have tested this a nd still no joy, we will be replacing the Prolgox card this evening
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top