attendant console question

[burak28]

I just like to ask how is it to enable two consoles operating the same time in one system Meridien Option 11C. as you know, we had a client which is having two consoles configuration but when we connected both at the same time the other one became passive and only one of them is having an active operation. I have checked the configuration of the consoles on LD 20. as such below:



REQ: prt

TYPE: tnb



TN 11 0

DATE

PAGE

DES



TN 011 0 00 00

TYPE 2250

CDEN 8D

CUST 0

SGRP 0

SETN 011 0 00 01

ANUM 01

IADN

ALPD NO

SSU

ICDR ICDD

ABAN ABDD

CPND CNDA

PRES 00 01 02 03 04 05 06 07 08 09

AADN

DNDI DNDA

DAPC DAPA

LANG 00

KEY 00 BVR

KEY 01 BIN

KEY 02 SSC 0010

KEY 03 DPS

KEY 04 DPD

KEY 05 BKI

KEY 06 ADL 16

KEY 07 DTM

KEY 08 DDT

KEY 09

KEY 10

KEY 11

KEY 12

KEY 13

 

[hartburn]

I could be well off the mark, but are the ANUM values different for the two consoles?

The one you have posted is 01, the other should be 02. Our is anyway.

 

[GHTROUT]

The way to test consoles in front of a customer is this.

At a very quiet time while there are no other calls, have both consoles active, and both with no loop keys pressed. During the test, do not answer the consoles....just listen to them.

Go to a nearby phone and dial 0 - it will buzz one console, now hang up. Dial 0 again, it will ring the other console.





~~~
GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies