Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASA 5510 VPN - No Translation group found 2

Status
Not open for further replies.
t7fire

t7fire

MIS
Jan 13, 2007
24
US
Greetings,

I am trying to setup VPN on my cisco ASA 5510 and can not get traffic to pass. I connect and authorize but I can't even ping. The event log says No translation group found for tcp src outside: 192.168.11.101 dst Inside: 192.168.10.x. My internal IP are 192.168.10.x 255.255.254.0 (10. and 11. with most of the 11. reserved for VPN)

I am new to cisco so I have been doing everything through ASDM. Please help



Result of the command: "sh run"

: Saved
:
ASA Version 7.2(1)
!
hostname ciscoasa
domain-name *******
enable password **********. encrypted
names
!
interface Ethernet0/0
nameif Inside
security-level 50
ip address 192.168.10.253 255.255.255.0
!
interface Ethernet0/1
nameif Outside
security-level 0
ip address 209.x.x.x 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
security-level 0
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 10.10.10.10 255.255.255.0
management-only
!
passwd *******. encrypted
banner login **** Unauthorised Access is Strictly Forbidden ****
banner login ******* To logon enter appropriate password ******
banner login *********** ALL LOGIN ATTEMPS ARE LOGGED **********
ftp mode passive
dns domain-lookup Inside
dns server-group DefaultDNS
timeout 5
name-server 209.x.x.x
domain-name MINE
dns server-group INSIDEDNS
timeout 5
name-server 192.168.10.1
name-server 209.x.x.x
domain-name MINE
same-security-traffic permit intra-interface
access-list Outside_access_in extended permit tcp any host 209.x.x.x4 eq www
access-list Outside_access_in extended permit tcp any host 209.x.x.x4 eq 3589
access-list Outside_access_in extended permit tcp any host 209.x.x.x4 eq 1597
access-list Outside_access_in extended permit tcp any host 209.x.x.x4 eq 1598
access-list Outside_access_in extended permit icmp any host 209.x.x.x4
access-list Outside_access_in extended permit tcp any host 209.x.x.x4 eq smtp
access-list Outside_access_in extended permit tcp any host 209.x.x.x4 eq 1306
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.10.0 255.255.254.0
access-list Inside_access_out extended permit tcp any any
pager lines 24
logging enable
logging asdm warnings
logging from-address
logging class vpn asdm debugging
logging class email mail debugging
mtu Inside 1500
mtu Outside 1500
mtu management 1500
ip local pool vpn_users 192.168.50.100-192.168.50.200 mask 255.255.255.0
ip local pool Inside_Add 192.168.11.101-192.168.11.199 mask 255.255.254.0
ip verify reverse-path interface Outside
ip audit attack action alarm drop
icmp permit any Inside
icmp permit any Outside
asdm image disk0:/asdm521.bin
no asdm history enable
arp timeout 14400
nat-control
global (Outside) 100 209.x.x.x4 netmask 255.255.255.255
nat (Inside) 100 0.0.0.0 0.0.0.0
static (Inside,Outside) tcp 209.x.x.x4 smtp 192.168.10.2 smtp netmask 255.255.255.255 dns
static (Inside,Outside) tcp 209.x.x.x4 1598 192.168.10.45 3389 netmask 255.255.255.255
static (Inside,Outside) tcp 209.x.x.x4 1597 192.168.10.5 3389 netmask 255.255.255.255
static (Inside,Outside) tcp 209.x.x.x4 3589 192.168.10.1 3389 netmask 255.255.255.255
static (Inside,Outside) tcp 209.x.x.x4 255.255.255.255
static (Inside,Outside) tcp 209.x.x.x4 1306 192.168.10.33 3389 netmask 255.255.255.255
access-group Inside_access_out out interface Inside
access-group Outside_access_in in interface Outside
route Inside 192.168.10.0 255.255.254.0 192.168.10.253 1
route Outside 0.0.0.0 0.0.0.0 209.x.x.x3 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa-server Main protocol nt
aaa-server Main host 192.168.10.1
nt-auth-domain-controller 192.168.10.1
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 192.168.10.1
vpn-idle-timeout 30
vpn-session-timeout none
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl
default-domain value MINE
client-firewall none
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method auto-detect
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
username user password ***********== nt-encrypted
username user attributes
vpn-group-policy DfltGrpPolicy
http server enable
http 192.168.10.0 255.255.255.0 Inside
http 10.10.10.0 255.255.255.0 management
http 192.168.11.0 255.255.255.0 management
http 12.201.0.0 255.255.0.0 Outside
snmp-server host management 192.168.10.10 community public
snmp-server location here
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change fru-insert fru-remove
snmp-server enable traps remote-access session-threshold-exceeded
sysopt connection tcpmss 0
crypto ipsec transform-set DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec transform-set DES-SHA-TRANS mode transport
crypto dynamic-map Outside_dyn_map 20 set transform-set DES-SHA-TRANS
crypto map Outside_map 20 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 20
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
tunnel-group DefaultRAGroup general-attributes
address-pool Inside_Add
authorization-server-group LOCAL
default-group-policy DefaultRAGroup
authorization-dn-attributes use-entire-name
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
peer-id-validate cert
chain
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2
tunnel-group-map enable rules
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
telnet 192.168.10.0 255.255.255.0 Inside
telnet 192.168.11.0 255.255.255.0 Inside
telnet timeout 5
ssh timeout 5
console timeout 0
priority-queue Inside
queue-limit 488
tx-ring-limit 8
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
smtp-server 192.168.10.2
client-update enable
prompt hostname context
no compression svc http-comp
Cryptochecksum:c1c99638f3f2d5831485f111152d0eb9
: end
 
Sort by date Sort by votes
Hi Bud

It looks like you missing your NAT 0. You need to tell you firewall not to NAT your inside range when comunicating with your RAS VPN range.

The following commands should do it.

nat (inside) 0 access-list inside_nat0_outbound
access-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.0
 
Upvote 0 Downvote
aisdale,

That worked great. Now I can pass traffic via IP. However, I cannot resolve DNS.

Any Ideas
 
Upvote 0 Downvote
This line
access-list Inside_access_out extended permit tcp any any
only allows TCP. DNS is UDP. You can add a line allowing UDP or just take the ACL off. All traffic is allowed out by default. No need to restrict it unless you need to block specific traffic.

access-list Inside_access_out extended permit ip any any
allows everything.


Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
Supergrrover,

I tried that, however still not luck, I went as far as specifing the nslookup server to 192.168.10.1 on client side, still not lookup. Also I cannot pass internet traffic out once connected to VPN. I am using WinXP vpn client. Herer is new scrubbed config


Result of the command: "sh run"

: Saved
:
ASA Version 7.2(1)
!
hostname ciscoasa
domain-name **********
enable password ***********. encrypted
names
!
interface Ethernet0/0
nameif Inside
security-level 50
ip address 192.168.10.253 255.255.255.0
!
interface Ethernet0/1
nameif Outside
security-level 0
ip address 209.***.***.**8 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
security-level 0
no ip address
!
interface Management0/0
shutdown
nameif management
security-level 100
ip address 10.10.10.10 255.255.255.0
management-only
!
passwd ****************. encrypted
banner login **** Unauthorised Access is Strictly Forbidden ****
banner login ******* To logon enter appropriate password ******
banner login *********** ALL LOGIN ATTEMPS ARE LOGGED **********
ftp mode passive
dns domain-lookup Inside
dns server-group DefaultDNS
timeout 5
name-server ***.***.***.***
domain-name *****
dns server-group ******
timeout 5
name-server 192.168.10.1
name-server ***.***.***.***
domain-name ******
same-security-traffic permit intra-interface
access-list Outside_access_in extended permit tcp any host 209.***.***.**4 eq www
access-list Outside_access_in extended permit icmp any host 209.***.***.**4
access-list Outside_access_in extended permit tcp any host 209.***.***.**4 eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.10.0 255.255.254.0
access-list Outside_cryptomap extended permit ip any 192.168.10.0 255.255.255.0
access-list no-nat extended permit ip any 192.168.11.0 255.255.255.0
access-list Inside_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm warnings
logging from-address ********
logging class ip asdm debugging
logging class vpn asdm debugging
logging class email mail debugging
mtu Inside 1500
mtu Outside 1500
mtu management 1500
ip local pool Inside_Add 192.168.11.101-192.168.11.199 mask 255.255.254.0
ip verify reverse-path interface Outside
ip audit attack action alarm drop
icmp permit any Inside
icmp permit any Outside
asdm image disk0:/asdm521.bin
no asdm history enable
arp timeout 14400
nat-control
global (Outside) 100 209.***.***.**4 netmask 255.255.255.255
nat (Inside) 0 access-list no-nat
nat (Inside) 100 0.0.0.0 0.0.0.0
static (Inside,Outside) tcp 209.***.***.**4 smtp 192.168.10.2 smtp netmask 255.255.255.255 dns
static (Inside,Outside) tcp 209.***.***.**4 255.255.255.255
access-group Inside_access_in in interface Inside
access-group Outside_access_in in interface Outside
route Inside 192.168.10.0 255.255.254.0 192.168.10.253 1
route Inside 10.24.15.0 255.255.255.0 192.168.10.254 1
route Inside 192.168.1.0 255.255.255.0 192.168.10.254 1
route Outside 0.0.0.0 0.0.0.0 209.***.***.**3 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa-server Main protocol nt
aaa-server Main host 192.168.10.1
nt-auth-domain-controller 192.168.10.1
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 192.168.10.1 ***.***.***.***
vpn-access-hours none
vpn-simultaneous-logins 5
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec
ip-comp enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl
default-domain value **********
client-firewall none
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method auto-detect
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
username ****** password ***************== nt-encrypted
username ****** attributes
vpn-group-policy DfltGrpPolicy
http server enable
http 10.10.10.0 255.255.255.0 management
http 192.168.10.0 255.255.255.0 Inside
snmp-server host Inside 192.168.10.10 community public
snmp-server location ******
no snmp-server contact
snmp-server community ***********
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change fru-insert fru-remove
snmp-server enable traps remote-access session-threshold-exceeded
sysopt connection tcpmss 0
sysopt noproxyarp Inside
sysopt noproxyarp Outside
sysopt noproxyarp management
crypto ipsec transform-set DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec transform-set DES-SHA-TRANS mode transport
crypto dynamic-map Outside_dyn_map 20 set transform-set DES-SHA-TRANS
crypto map Outside_map 20 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 20
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
tunnel-group DefaultRAGroup general-attributes
address-pool Inside_Add
authorization-server-group LOCAL
default-group-policy DefaultRAGroup
authorization-dn-attributes use-entire-name
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
peer-id-validate cert
chain
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2
tunnel-group-map enable rules
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
telnet 192.168.10.0 255.255.255.0 Inside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access management
priority-queue Inside
queue-limit 488
tx-ring-limit 8
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
smtp-server 192.168.10.2
client-update enable
prompt hostname context
no compression svc http-comp
Cryptochecksum:b71c339d083097cf64bc76324a42ce5a
: end
 
Upvote 0 Downvote
Are you using the cisco client on XP or are you using the XP's native client? If XP's native client - ditch it. Use Cisco's - much better.

There are a few odd things about the config -
Change these
ip local pool Inside_Add 192.168.11.101-192.168.11.199 mask 255.255.254.0
to
ip local pool Inside_Add 192.168.11.101-192.168.11.199 mask 255.255.255.0

access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.10.0 255.255.254.0
to
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.10.0 255.255.255.0

delete these
access-group Inside_access_in in interface Inside
route Inside 192.168.10.0 255.255.254.0 192.168.10.253 1

For the split tunnel to work you will need to enable it. Go into the default group policy
group-policy DfltGrpPolicy attributes
and change these
split-tunnel-policy tunnelall
split-tunnel-network-list none
to
split-tunnel-policy tunnelspecified
split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl



Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
Ok,

I have tried that and no luck. I am using the windows XP native client. That was the first out of the two I could even get connected.

 
Upvote 0 Downvote
The windows xp client may not support split tunneling. I am not sure as I have never set it up.


Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

intel233
  • Locked
  • Question
Cisco ASA 5510 -Static NAT Help
Replies
8
Views
329
intel233
intel233
intel233
  • Locked
  • Question
Cisco ASA - VPN Question
Replies
6
Views
299
intel233
intel233
WhosYourDiffie
  • Locked
  • Question
Cisco ASA 5506 VPN for Avaya Phones
Replies
0
Views
88
WhosYourDiffie
WhosYourDiffie
ITSUPPORTIT
  • Locked
  • Question
VPN from ASA 5510 and RV215W problem
Replies
0
Views
79
ITSUPPORTIT
ITSUPPORTIT
gkreg
  • Locked
  • Question
asa 5500-x url filtering
Replies
0
Views
202
gkreg
gkreg

Part and Inventory Search

Sponsor

Back
Top