ARS/AAR Dialing without FAC

[aarodriguez]

Hi All, any of you knows how to order the activation of the feature
ARS/AAR Dialing without FAC? n

I need this feature on a S8400 CM4 and a Definity Si R10

any Idea?

Thaks a lot

 

[phoneguy55]

Anything in the 'disp sys cust' table would need to be changed by Avaya or an Avaya BP.

 

[mikeydidit]

If you will post what it is that you are trying to do, their may be a work around for it.

"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read faq690-6594

 

[AvayaTier3]

R10 and above, Avaya or a Business Partner must go to the RFA website and turn the feature on for the customer's SID and MIDs then download new license files to be installed in the switch / server where you want the feature activated.
For that feature most likely is not a RTU charge.

 

[jimmyd24]

Hi
I am having the same problem.
What I am tring to do is setup an IP trunk between a SOE and S8500.
I can get it to work from the SOE to the S8500 by dialing 8
and the ex number, but I can't get the S8500 to dial to the SOE.
Does anyone know another way around this?
Thanks,
Jim

 

[Midstream]

What is SOE? [Partner Small Office Edition?]

And, how are you trying to dial from the S8500 to the SOE? Are you using UDP and four digit dialing?

 

[Midstream]

We have also tagged along on someone else's thread. You should start a new one and go from there.